Canada/USA: 1-855-289-5659  Mexico:  662-471-6225

US Dollar
(0)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Dynapro W-Series replaces Weir Warman Dynapro W-Series replaces Weir Warman
  • Dynapro W-Series replaces Weir Warman Dynapro W-Series replaces Weir Warman
  • W-Series exploded view replaces Weir Warman W-Series exploded view replaces Weir Warman
  • W-Series Pump Curve replaces Weir Warman W-Series Pump Curve replaces Weir Warman
  • W-Series Pump Curve replaces Weir Warman W-Series Pump Curve replaces Weir Warman
  • W-Series exploded view replaces Weir Warman W-Series exploded view replaces Weir Warman
  • W-Series exploded view replaces Weir Warman W-Series exploded view replaces Weir Warman

W-SERIES

Price on Application

Availability: In stock

SKU#: W-SERIES

Quick Overview

All Parts are 100% interchangeable with Weir Warman. W-Series hard metal and rubber heavy duty slurry pumps are designed for the most difficult pumping applications. They handle highly abrasive, high density and erosive slurries.


AH all sizes
Type L all sizes
MCR & MCU Sizes from the 350 up to the 750
SP all sizes

Details

W-Series hard metal and rubber heavy duty slurry pumps are designed for the most difficult pumping applications. They handle highly abrasive, high density and erosive slurries.

AH all sizes

Type L all sizes

MCR & MCU Sizes from the 350 up to the 750

SP all sizes

Mineral processing Chemical Industry Flue Gas Desulphurization (FGD) Coal washing Metallurgy

Replacement Warman AH (DH) all sizes, Discharge: From 1” up to 18” Head: Up to 240 ft. Flow: Up to 22,000 gpm

Replacement Warman Type L all sizes

Replacement Warman MCR & MCU Sizes from the 350 up to the 750

Replacement Warman SP all sizes

Abrasion resistant Chemical compatibility Complete selection of metals and elastomers Material: Casing - Made of Ductile Iron with ribs to increase wear life against high pressure. Wet Ends - Impellers, Liners, and Volutes are made of High-Chrome Alloy or Rubber, to resist wear, corrosion, erosion, and impact. The metal and rubber parts are interchangeable. Part design: Impeller - Wide passage and recessed vanes help to lower internal velocity to extend wear life. Wet parts - Designed for different working conditions including large particle or high head. Gland Seal Most common type of seal for clean water using gland water to lubricate the packing through the lantern restrictor, preventing leakage from the casing. Simple structure, easy maintenance, and low cost, where expeller seal is not an option. Expeller Seal The expeller generates a reverse centrifugal force to prevent leakage. It can be used for single-stage pump or the first pump of multiple pumps in a series when the positive pressure at suction side is larger than that at discharge side by no more than 10%. No gland water is required. The slurry will not be diluted, therefore used where any dilution of slurry is not allowed. Mechanical Seal Suitable for applications where no extra substance is allowed to mix with the fluid being pumped. Most commonly used with chemicals and the food industry.
Please visit our resources page for printable W-Series brochures

Quick Enquiry